SOUTH THOMASTON, Maine — The South Thomaston fire chief issued a detailed report to the Select Board over the discharge of firefighting foam in neighboring Owls Head on Nov. 2.
Chief David Elwell said there was only residual foam in the truck that was later rinsed out at a hydrant at the intersection of North Shore and Ash Point drives in Owls Head. He said in his conversation with the Maine Department of Environmental Protection, the representative advised that, based on the information provided, no cleanup would be required.
“He also indicated that there were currently no established procedures or specific state protocols in place to address this type of incident involving the newer PFAS-related foam concerns,” Elwell said in his report.
Later in the report, the chief said the Department of Environmental Protection representative said that this discharge was nothing like the spill that occurred in Brunswick on the airfield.
The incident has been sharply criticized by Owls Head officials.
“It just boggles my mind with all the attention of what happened with the Brunswick discharge,” Owls Head Town Administrator Rodney Mason told the Select Board at its Monday meeting.
The Owls Head incident occurred the night of Nov. 2 at the intersection of Ash Point and North Shore drives. Mason said he noticed a fire truck using a hydrant at that location and spraying water. He thought it was an Owls Head truck and called the chief to ask what was going on, and was told it was not an Owls Head truck.
Mason said he then returned and videotaped what the South Thomaston truck and crew were doing because he noticed they were washing away gravel and loam he had put down at the former Grange Hall property that he and his wife had purchased.
The town, including the fire department, was not notified that South Thomaston would be coming to their town, Mason said.
Mason said the foam was being discharged into a culvert and with the water from the fire hydrant at the intersection, it spread the chemical across his property and across North Shore Drive. Some of the homes in that area get their water from wells.
The town administrator said the foam was clearly visible the following day.
The town administrator said he notified the Department of Environmental Protection and someone came down and did some soil testing the next day.
In his report, Elwell said on the evening of Nov. 2, members of the South Thomaston Fire Department were conducting the department’s regularly scheduled monthly apparatus and equipment inspections. During the inspection, a department member was assigned to Engine 51 and was completing the monthly equipment checks. Engine 51 is equipped with two separate foam systems: one containing Class A foam and the other containing Class B foam.
While circulating the pump and inspecting the apparatus compartments, the firefighter inadvertently activated the Class A and Class B foam system switches. He believed he was operating the switches for the apparatus floodlights to verify their proper operation. However, the switches he activated controlled the two foam systems, the report stated.
Shortly after the switches were activated, members observed foam discharging from the water tank overflow. The situation was immediately recognized, and personnel proceeded to the pump panel and shut off both foam system switches.
Several years ago, the department drained the Class A and Class B foam tanks on Engine 51, as the department was no longer carrying foam on this apparatus. However, it is believed that a residual amount of foam may have remained in one or both tanks following the draining process, the report stated.
For several years, the foam tank gauges have consistently indicated that both tanks were empty. The department had not been aware of any remaining foam in either tank.
Upon recognizing that the foam systems had been inadvertently activated, the chief said he immediately contacted Maine Water to request guidance regarding an appropriate hydrant location where he could send the truck to be refilled with water.
Maine Water recommended using the hydrant located at the intersection of North Shore and Ash Point drives in Owls Head, Maine to fill the truck, the chief said in his report.
The chief said he initially had thought about sending the truck out back of the fire department to the fire pond and using that as a water supply. Due to the drought, there was not enough water to flush this truck.
“I also thought about the wetland portion around the pond and including the pond. I decided it was not a good idea to flood that wet area with the foam due to animals and the wetlands. I thought it would be a better spot to do this where there is city water and no wells in the immediate area of the hydrant,” the chief said.
The urgency of this response was based on the potential consequences of the two foam products mixing within the apparatus plumbing and pump system. Class A and Class B foam products can react when mixed, potentially creating a gel-like substance that can cause significant damage to the pump and associated plumbing, the chief said in his report.
The department has experienced a similar issue with this apparatus in the past, which resulted in repair costs totaling well into the tens of thousands of dollars. Given this previous experience, it was important to take immediate action to remove any remaining foam from the system and prevent additional damage to the apparatus, the chief said.
“Due to the immediate concern of preventing damage to the apparatus, I made the decision to proceed with flushing the system at the recommended hydrant location before I had an opportunity to notify all applicable authorities,” the chief said.
Elwell said he received a telephone call from the Owls Head fire chief advising that he had received a complaint from the property owner where the hydrant was located. The owner is Owls Head Administrator Mason.
“Before I was able to contact the Maine Department of Environmental Protection, the property owner had already contacted the DEP regarding the incident,” the South Thomaston chief stated.
On Nov. 9, the Department of Environmental Protection representative came out and tested the truck. He looked in the foam cells and there was no foam in them that he could test. The main drain to the pump was opened and there was a little residual foam laying in that drain that he was able to get samples of, the chief said in the report.
The test results were expected to take a couple weeks.
To prevent an accidental activation of either foam system in the future, the department’s next step will be to disconnect the foam activation switches at the pump panel, the chief said.
This story appears through a media partnership with Midcoast Villager.


